B &[_0@s(ddlmZddlZGdddeZdS))BaseLayoutHierarchyTypeNcMs" eZdZdZdZddddddd d d d d ddddddddddddddddddd d!d"d#d$d%d&d'd(d)d*d+d,d-d.d/d0d1d2d3d4d5d6d7d8d9d:d;dd?d@dAdBdCdDdEdFdGdHdIdJdKdLdMdNhLZedOdPZejdQdPZedRdSZ e jdTdSZ edUdVZ e jdWdVZ edXdYZ e jdZdYZ ed[d\Z e jd]d\Z ed^d_Z e jd`d_Z edadbZejdcdbZedddeZejdfdeZedgdhZejdidhZedjdkZejdldkZedmdnZejdodnZedpdqZejdrdqZedsdtZejdudtZedvdwZejdxdwZedydzZejd{dzZed|d}Zejd~d}ZeddZejddZeddZejddZeddZejddZeddZejddZeddZejddZeddZejddZeddZejddZeddZejddZeddZ e jddZ eddZ!e!jddZ!eddZ"e"jddZ"eddZ#e#jddZ#eddZ$e$jddZ$eddZ%e%jddZ%eddZ&e&jddZ&eddZ'e'jddZ'eddZ(e(jddZ(eddZ)e)jddZ)eddZ*e*jddZ*eddZ+e+jddZ+eddZ,e,jddZ,eddZ-e-jddZ-edd„Z.e.jdd„Z.eddńZ/e/jddńZ/eddȄZ0e0jddȄZ0edd˄Z1e1jdd˄Z1edd΄Z2e2jdd΄Z2eddфZ3e3jddфZ3eddԄZ4e4jddԄZ4eddׄZ5e5jddׄZ5eddڄZ6e6jddڄZ6edd݄Z7e7jdd݄Z7eddZ8e8jddZ8eddZ9e9jddZ9eddZ:e:jddZ:eddZ;e;jddZ;eddZe>jddZ>eddZ?e?jddZ?eddZ@e@jddZ@eddZAeAjddZAeddZBeBjddZBeddZCeCjddZCeddZDeDjddZDeddZEeEjddZEed d ZFeFjd d ZFed d ZGeGjdd ZGeddZHeHjddZHeddZIeIjddZIeddZJeJjddZJeddZKeKjddZKeddZLeLjddZLeddZMeMjd dZMed!d"ZNeNjd#d"ZNed$d%ZOeOjd&d%ZOed'd(ZPePjd)d(ZPed*d+ZQeQjd,d+ZQed-d.ZReRjd/d.ZRed0d1ZSeSjd2d1ZSed3d4ZTdHd5iZUd9fd7d8 ZVZWS(:YAxisZlayoutz layout.yaxisanchor automargin autorangecalendar categoryarraycategoryarraysrc categoryordercolor constrainconstraintoward dividercolor dividerwidthdomaindtickexponentformat fixedrange gridcolor gridwidth hoverformatlayer linecolor linewidthmatches minexponentmirrornticks overlayingpositionrangerangebreakdefaults rangebreaks rangemode scaleanchor scaleratioseparatethousands showdividers showexponentshowgridshowline showspikesshowticklabelsshowtickprefixshowticksuffixside spikecolor spikedash spikemode spikesnapspikethicknesstick0 tickangle tickcolortickfont tickformattickformatstopdefaultstickformatstops ticklabelmodeticklentickmode tickprefixtickstickson ticksuffixticktext ticktextsrctickvals tickvalssrc tickwidthtitle titlefonttype uirevisionvisiblezeroline zerolinecolor zerolinewidthcCs|dS)aZ If set to an opposite-letter axis id (e.g. `x2`, `y`), this axis is bound to the corresponding opposite-letter axis. If set to "free", this axis' position is determined by `position`. The 'anchor' property is an enumeration that may be specified as: - One of the following enumeration values: ['free'] - A string that matches one of the following regular expressions: ['^x([2-9]|[1-9][0-9]+)?( domain)?$', '^y([2-9]|[1-9][0-9]+)?( domain)?$'] Returns ------- Any r)selfrPrPC/tmp/pip-install-l29rncou/plotly/plotly/graph_objs/layout/_yaxis.pyr\sz YAxis.anchorcCs ||d<dS)NrrP)rQvalrPrPrRrpscCs|dS)z Determines whether long tick labels automatically grow the figure margins. The 'automargin' property must be specified as a bool (either True, or False) Returns ------- bool rrP)rQrPrPrRrvs zYAxis.automargincCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Determines whether or not the range of this axis is computed in relation to the input data. See `rangemode` for more info. If `range` is provided, then `autorange` is set to False. The 'autorange' property is an enumeration that may be specified as: - One of the following enumeration values: [True, False, 'reversed'] Returns ------- Any rrP)rQrPrPrRrszYAxis.autorangecCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Sets the calendar system to use for `range` and `tick0` if this is a date axis. This does not set the calendar for interpreting data on this axis, that's specified in the trace or via the global `layout.calendar` The 'calendar' property is an enumeration that may be specified as: - One of the following enumeration values: ['gregorian', 'chinese', 'coptic', 'discworld', 'ethiopian', 'hebrew', 'islamic', 'julian', 'mayan', 'nanakshahi', 'nepali', 'persian', 'jalali', 'taiwan', 'thai', 'ummalqura'] Returns ------- Any rrP)rQrPrPrRrszYAxis.calendarcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)ah Sets the order in which categories on this axis appear. Only has an effect if `categoryorder` is set to "array". Used with `categoryorder`. The 'categoryarray' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray rrP)rQrPrPrRrszYAxis.categoryarraycCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Sets the source reference on Chart Studio Cloud for categoryarray . The 'categoryarraysrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str r rP)rQrPrPrRr s zYAxis.categoryarraysrccCs ||d<dS)Nr rP)rQrSrPrPrRr scCs|dS)a Specifies the ordering logic for the case of categorical variables. By default, plotly uses "trace", which specifies the order that is present in the data supplied. Set `categoryorder` to *category ascending* or *category descending* if order should be determined by the alphanumerical order of the category names. Set `categoryorder` to "array" to derive the ordering from the attribute `categoryarray`. If a category is not found in the `categoryarray` array, the sorting behavior for that attribute will be identical to the "trace" mode. The unspecified categories will follow the categories in `categoryarray`. Set `categoryorder` to *total ascending* or *total descending* if order should be determined by the numerical order of the values. Similarly, the order can be determined by the min, max, sum, mean or median of all the values. The 'categoryorder' property is an enumeration that may be specified as: - One of the following enumeration values: ['trace', 'category ascending', 'category descending', 'array', 'total ascending', 'total descending', 'min ascending', 'min descending', 'max ascending', 'max descending', 'sum ascending', 'sum descending', 'mean ascending', 'mean descending', 'median ascending', 'median descending'] Returns ------- Any r rP)rQrPrPrRr s zYAxis.categoryordercCs ||d<dS)Nr rP)rQrSrPrPrRr scCs|dS)a Sets default for all colors associated with this axis all at once: line, font, tick, and grid colors. Grid color is lightened by blending this with the plot background Individual pieces can override this. The 'color' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str r rP)rQrPrPrRr s6z YAxis.colorcCs ||d<dS)Nr rP)rQrSrPrPrRr HscCs|dS)a If this axis needs to be compressed (either due to its own `scaleanchor` and `scaleratio` or those of the other axis), determines how that happens: by increasing the "range" (default), or by decreasing the "domain". The 'constrain' property is an enumeration that may be specified as: - One of the following enumeration values: ['range', 'domain'] Returns ------- Any r rP)rQrPrPrRr NszYAxis.constraincCs ||d<dS)Nr rP)rQrSrPrPrRr `scCs|dS)ap If this axis needs to be compressed (either due to its own `scaleanchor` and `scaleratio` or those of the other axis), determines which direction we push the originally specified plot area. Options are "left", "center" (default), and "right" for x axes, and "top", "middle" (default), and "bottom" for y axes. The 'constraintoward' property is an enumeration that may be specified as: - One of the following enumeration values: ['left', 'center', 'right', 'top', 'middle', 'bottom'] Returns ------- Any r rP)rQrPrPrRr fszYAxis.constraintowardcCs ||d<dS)Nr rP)rQrSrPrPrRr zscCs|dS)aN Sets the color of the dividers Only has an effect on "multicategory" axes. The 'dividercolor' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str rrP)rQrPrPrRrs4zYAxis.dividercolorcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a  Sets the width (in px) of the dividers Only has an effect on "multicategory" axes. The 'dividerwidth' property is a number and may be specified as: - An int or float Returns ------- int|float rrP)rQrPrPrRrs zYAxis.dividerwidthcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Sets the domain of this axis (in plot fraction). The 'domain' property is an info array that may be specified as: * a list or tuple of 2 elements where: (0) The 'domain[0]' property is a number and may be specified as: - An int or float in the interval [0, 1] (1) The 'domain[1]' property is a number and may be specified as: - An int or float in the interval [0, 1] Returns ------- list rrP)rQrPrPrRrsz YAxis.domaincCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48" The 'dtick' property accepts values of any type Returns ------- Any rrP)rQrPrPrRrsz YAxis.dtickcCs ||d<dS)NrrP)rQrSrPrPrRr scCs|dS)a Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B. The 'exponentformat' property is an enumeration that may be specified as: - One of the following enumeration values: ['none', 'e', 'E', 'power', 'SI', 'B'] Returns ------- Any rrP)rQrPrPrRrszYAxis.exponentformatcCs ||d<dS)NrrP)rQrSrPrPrRr#scCs|dS)z Determines whether or not this axis is zoom-able. If true, then zoom is disabled. The 'fixedrange' property must be specified as a bool (either True, or False) Returns ------- bool rrP)rQrPrPrRr)s zYAxis.fixedrangecCs ||d<dS)NrrP)rQrSrPrPrRr8scCs|dS)a Sets the color of the grid lines. The 'gridcolor' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str rrP)rQrPrPrRr>s3zYAxis.gridcolorcCs ||d<dS)NrrP)rQrSrPrPrRrsscCs|dS)z Sets the width (in px) of the grid lines. The 'gridwidth' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float rrP)rQrPrPrRrys zYAxis.gridwidthcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Sets the hover text formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format And for dates see: https://github.com/d3/d3-time-format#locale_format We add one item to d3's date formatter: "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" The 'hoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str rrP)rQrPrPrRrszYAxis.hoverformatcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a| Sets the layer on which this axis is displayed. If *above traces*, this axis is displayed above all the subplot's traces If *below traces*, this axis is displayed below all the subplot's traces, but above the grid lines. Useful when used together with scatter-like traces with `cliponaxis` set to False to show markers and/or text nodes above this axis. The 'layer' property is an enumeration that may be specified as: - One of the following enumeration values: ['above traces', 'below traces'] Returns ------- Any rrP)rQrPrPrRrsz YAxis.layercCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)a Sets the axis line color. The 'linecolor' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str rrP)rQrPrPrRrs3zYAxis.linecolorcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)z Sets the width (in px) of the axis line. The 'linewidth' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float rrP)rQrPrPrRrs zYAxis.linewidthcCs ||d<dS)NrrP)rQrSrPrPrRr scCs|dS)a  If set to another axis id (e.g. `x2`, `y`), the range of this axis will match the range of the corresponding axis in data- coordinates space. Moreover, matching axes share auto-range values, category lists and histogram auto-bins. Note that setting axes simultaneously in both a `scaleanchor` and a `matches` constraint is currently forbidden. Moreover, note that matching axes must have the same `type`. The 'matches' property is an enumeration that may be specified as: - A string that matches one of the following regular expressions: ['^x([2-9]|[1-9][0-9]+)?( domain)?$', '^y([2-9]|[1-9][0-9]+)?( domain)?$'] Returns ------- Any rrP)rQrPrPrRrsz YAxis.matchescCs ||d<dS)NrrP)rQrSrPrPrRr(scCs|dS)a= Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B". The 'minexponent' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float rrP)rQrPrPrRr.s zYAxis.minexponentcCs ||d<dS)NrrP)rQrSrPrPrRr=scCs|dS)a Determines if the axis lines or/and ticks are mirrored to the opposite side of the plotting area. If True, the axis lines are mirrored. If "ticks", the axis lines and ticks are mirrored. If False, mirroring is disable. If "all", axis lines are mirrored on all shared-axes subplots. If "allticks", axis lines and ticks are mirrored on all shared-axes subplots. The 'mirror' property is an enumeration that may be specified as: - One of the following enumeration values: [True, 'ticks', False, 'all', 'allticks'] Returns ------- Any rrP)rQrPrPrRrCsz YAxis.mirrorcCs ||d<dS)NrrP)rQrSrPrPrRrWscCs|dS)a Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto". The 'nticks' property is a integer and may be specified as: - An int (or float that will be cast to an int) in the interval [0, 9223372036854775807] Returns ------- int rrP)rQrPrPrRr]sz YAxis.ntickscCs ||d<dS)NrrP)rQrSrPrPrRroscCs|dS)a If set a same-letter axis id, this axis is overlaid on top of the corresponding same-letter axis, with traces and axes visible for both axes. If False, this axis does not overlay any same-letter axes. In this case, for axes with overlapping domains only the highest-numbered axis will be visible. The 'overlaying' property is an enumeration that may be specified as: - One of the following enumeration values: ['free'] - A string that matches one of the following regular expressions: ['^x([2-9]|[1-9][0-9]+)?( domain)?$', '^y([2-9]|[1-9][0-9]+)?( domain)?$'] Returns ------- Any rrP)rQrPrPrRruszYAxis.overlayingcCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)aT Sets the position of this axis in the plotting space (in normalized coordinates). Only has an effect if `anchor` is set to "free". The 'position' property is a number and may be specified as: - An int or float in the interval [0, 1] Returns ------- int|float rrP)rQrPrPrRrszYAxis.positioncCs ||d<dS)NrrP)rQrSrPrPrRrscCs|dS)aT Sets the range of this axis. If the axis `type` is "log", then you must take the log of your desired range (e.g. to set the range from 1 to 100, set the range from 0 to 2). If the axis `type` is "date", it should be date strings, like date data, though Date objects and unix milliseconds will be accepted and converted to strings. If the axis `type` is "category", it should be numbers, using the scale where each category is assigned a serial number from zero in the order it appears. The 'range' property is an info array that may be specified as: * a list or tuple of 2 elements where: (0) The 'range[0]' property accepts values of any type (1) The 'range[1]' property accepts values of any type Returns ------- list r rP)rQrPrPrRr sz YAxis.rangecCs ||d<dS)Nr rP)rQrSrPrPrRr scCs|dS)a; The 'rangebreaks' property is a tuple of instances of Rangebreak that may be specified as: - A list or tuple of instances of plotly.graph_objs.layout.yaxis.Rangebreak - A list or tuple of dicts of string/value properties that will be passed to the Rangebreak constructor Supported dict properties: bounds Sets the lower and upper bounds of this axis rangebreak. Can be used with `pattern`. dvalue Sets the size of each `values` item. The default is one day in milliseconds. enabled Determines whether this axis rangebreak is enabled or disabled. Please note that `rangebreaks` only work for "date" axis type. name When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: false` or `enabled: false` to hide it). Has no effect outside of a template. pattern Determines a pattern on the time line that generates breaks. If *day of week* - days of the week in English e.g. 'Sunday' or `sun` (matching is case-insensitive and considers only the first three characters), as well as Sunday-based integers between 0 and 6. If "hour" - hour (24-hour clock) as decimal numbers between 0 and 24. for more info. Examples: - { pattern: 'day of week', bounds: [6, 1] } or simply { bounds: ['sat', 'mon'] } breaks from Saturday to Monday (i.e. skips the weekends). - { pattern: 'hour', bounds: [17, 8] } breaks from 5pm to 8am (i.e. skips non-work hours). templateitemname Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: false` or `enabled: false` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: true`. values Sets the coordinate values corresponding to the rangebreaks. An alternative to `bounds`. Use `dvalue` to set the size of the values along the axis. Returns ------- tuple[plotly.graph_objs.layout.yaxis.Rangebreak] r"rP)rQrPrPrRr"sCzYAxis.rangebreakscCs ||d<dS)Nr"rP)rQrSrPrPrRr" scCs|dS)ao When used in a template (as layout.template.layout.yaxis.rangebreakdefaults), sets the default property values to use for elements of layout.yaxis.rangebreaks The 'rangebreakdefaults' property is an instance of Rangebreak that may be specified as: - An instance of :class:`plotly.graph_objs.layout.yaxis.Rangebreak` - A dict of string/value properties that will be passed to the Rangebreak constructor Supported dict properties: Returns ------- plotly.graph_objs.layout.yaxis.Rangebreak r!rP)rQrPrPrRr!szYAxis.rangebreakdefaultscCs ||d<dS)Nr!rP)rQrSrPrPrRr!&scCs|dS)a If "normal", the range is computed in relation to the extrema of the input data. If *tozero*`, the range extends to 0, regardless of the input data If "nonnegative", the range is non-negative, regardless of the input data. Applies only to linear axes. The 'rangemode' property is an enumeration that may be specified as: - One of the following enumeration values: ['normal', 'tozero', 'nonnegative'] Returns ------- Any r#rP)rQrPrPrRr#,szYAxis.rangemodecCs ||d<dS)Nr#rP)rQrSrPrPrRr#?scCs|dS)aw If set to another axis id (e.g. `x2`, `y`), the range of this axis changes together with the range of the corresponding axis such that the scale of pixels per unit is in a constant ratio. Both axes are still zoomable, but when you zoom one, the other will zoom the same amount, keeping a fixed midpoint. `constrain` and `constraintoward` determine how we enforce the constraint. You can chain these, ie `yaxis: {scaleanchor: *x*}, xaxis2: {scaleanchor: *y*}` but you can only link axes of the same `type`. The linked axis can have the opposite letter (to constrain the aspect ratio) or the same letter (to match scales across subplots). Loops (`yaxis: {scaleanchor: *x*}, xaxis: {scaleanchor: *y*}` or longer) are redundant and the last constraint encountered will be ignored to avoid possible inconsistent constraints via `scaleratio`. Note that setting axes simultaneously in both a `scaleanchor` and a `matches` constraint is currently forbidden. The 'scaleanchor' property is an enumeration that may be specified as: - A string that matches one of the following regular expressions: ['^x([2-9]|[1-9][0-9]+)?( domain)?$', '^y([2-9]|[1-9][0-9]+)?( domain)?$'] Returns ------- Any r$rP)rQrPrPrRr$EszYAxis.scaleanchorcCs ||d<dS)Nr$rP)rQrSrPrPrRr$dscCs|dS)a\ If this axis is linked to another by `scaleanchor`, this determines the pixel to unit scale ratio. For example, if this value is 10, then every unit on this axis spans 10 times the number of pixels as a unit on the linked axis. Use this for example to create an elevation profile where the vertical scale is exaggerated a fixed amount with respect to the horizontal. The 'scaleratio' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float r%rP)rQrPrPrRr%jszYAxis.scaleratiocCs ||d<dS)Nr%rP)rQrSrPrPrRr%}scCs|dS)z If "true", even 4-digit integers are separated The 'separatethousands' property must be specified as a bool (either True, or False) Returns ------- bool r&rP)rQrPrPrRr&s zYAxis.separatethousandscCs ||d<dS)Nr&rP)rQrSrPrPrRr&scCs|dS)a9 Determines whether or not a dividers are drawn between the category levels of this axis. Only has an effect on "multicategory" axes. The 'showdividers' property must be specified as a bool (either True, or False) Returns ------- bool r'rP)rQrPrPrRr'szYAxis.showdividerscCs ||d<dS)Nr'rP)rQrSrPrPrRr'scCs|dS)a If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear. The 'showexponent' property is an enumeration that may be specified as: - One of the following enumeration values: ['all', 'first', 'last', 'none'] Returns ------- Any r(rP)rQrPrPrRr(szYAxis.showexponentcCs ||d<dS)Nr(rP)rQrSrPrPrRr(scCs|dS)a Determines whether or not grid lines are drawn. If True, the grid lines are drawn at every tick mark. The 'showgrid' property must be specified as a bool (either True, or False) Returns ------- bool r)rP)rQrPrPrRr)s zYAxis.showgridcCs ||d<dS)Nr)rP)rQrSrPrPrRr)scCs|dS)z Determines whether or not a line bounding this axis is drawn. The 'showline' property must be specified as a bool (either True, or False) Returns ------- bool r*rP)rQrPrPrRr*s zYAxis.showlinecCs ||d<dS)Nr*rP)rQrSrPrPrRr*scCs|dS)a2 Determines whether or not spikes (aka droplines) are drawn for this axis. Note: This only takes affect when hovermode = closest The 'showspikes' property must be specified as a bool (either True, or False) Returns ------- bool r+rP)rQrPrPrRr+szYAxis.showspikescCs ||d<dS)Nr+rP)rQrSrPrPrRr+scCs|dS)z Determines whether or not the tick labels are drawn. The 'showticklabels' property must be specified as a bool (either True, or False) Returns ------- bool r,rP)rQrPrPrRr,s zYAxis.showticklabelscCs ||d<dS)Nr,rP)rQrSrPrPrRr,scCs|dS)a If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden. The 'showtickprefix' property is an enumeration that may be specified as: - One of the following enumeration values: ['all', 'first', 'last', 'none'] Returns ------- Any r-rP)rQrPrPrRr-szYAxis.showtickprefixcCs ||d<dS)Nr-rP)rQrSrPrPrRr-*scCs|dS)a+ Same as `showtickprefix` but for tick suffixes. The 'showticksuffix' property is an enumeration that may be specified as: - One of the following enumeration values: ['all', 'first', 'last', 'none'] Returns ------- Any r.rP)rQrPrPrRr.0s zYAxis.showticksuffixcCs ||d<dS)Nr.rP)rQrSrPrPrRr.?scCs|dS)ak Determines whether a x (y) axis is positioned at the "bottom" ("left") or "top" ("right") of the plotting area. The 'side' property is an enumeration that may be specified as: - One of the following enumeration values: ['top', 'bottom', 'left', 'right'] Returns ------- Any r/rP)rQrPrPrRr/Esz YAxis.sidecCs ||d<dS)Nr/rP)rQrSrPrPrRr/UscCs|dS)a7 Sets the spike color. If undefined, will use the series color The 'spikecolor' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str r0rP)rQrPrPrRr0[s3zYAxis.spikecolorcCs ||d<dS)Nr0rP)rQrSrPrPrRr0scCs|dS)a Sets the dash style of lines. Set to a dash type string ("solid", "dot", "dash", "longdash", "dashdot", or "longdashdot") or a dash length list in px (eg "5px,10px,2px,2px"). The 'spikedash' property is a string and must be specified as: - One of the following strings: ['solid', 'dot', 'dash', 'longdash', 'dashdot', 'longdashdot'] - A number that will be converted to a string Returns ------- str r1rP)rQrPrPrRr1szYAxis.spikedashcCs ||d<dS)Nr1rP)rQrSrPrPrRr1scCs|dS)an Determines the drawing mode for the spike line If "toaxis", the line is drawn from the data point to the axis the series is plotted on. If "across", the line is drawn across the entire plot area, and supercedes "toaxis". If "marker", then a marker dot is drawn on the axis the series is plotted on The 'spikemode' property is a flaglist and may be specified as a string containing: - Any combination of ['toaxis', 'across', 'marker'] joined with '+' characters (e.g. 'toaxis+across') Returns ------- Any r2rP)rQrPrPrRr2szYAxis.spikemodecCs ||d<dS)Nr2rP)rQrSrPrPrRr2scCs|dS)aT Determines whether spikelines are stuck to the cursor or to the closest datapoints. The 'spikesnap' property is an enumeration that may be specified as: - One of the following enumeration values: ['data', 'cursor', 'hovered data'] Returns ------- Any r3rP)rQrPrPrRr3szYAxis.spikesnapcCs ||d<dS)Nr3rP)rQrSrPrPrRr3scCs|dS)z Sets the width (in px) of the zero line. The 'spikethickness' property is a number and may be specified as: - An int or float Returns ------- int|float r4rP)rQrPrPrRr4s zYAxis.spikethicknesscCs ||d<dS)Nr4rP)rQrSrPrPrRr4scCs|dS)a Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`=*L* (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears. The 'tick0' property accepts values of any type Returns ------- Any r5rP)rQrPrPrRr5sz YAxis.tick0cCs ||d<dS)Nr5rP)rQrSrPrPrRr5 scCs|dS)a Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically. The 'tickangle' property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90). Returns ------- int|float r6rP)rQrPrPrRr6szYAxis.tickanglecCs ||d<dS)Nr6rP)rQrSrPrPrRr6!scCs|dS)a Sets the tick color. The 'tickcolor' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str r7rP)rQrPrPrRr7's3zYAxis.tickcolorcCs ||d<dS)Nr7rP)rQrSrPrPrRr7\scCs|dS)a Sets the tick font. The 'tickfont' property is an instance of Tickfont that may be specified as: - An instance of :class:`plotly.graph_objs.layout.yaxis.Tickfont` - A dict of string/value properties that will be passed to the Tickfont constructor Supported dict properties: color family HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman". size Returns ------- plotly.graph_objs.layout.yaxis.Tickfont r8rP)rQrPrPrRr8bs&zYAxis.tickfontcCs ||d<dS)Nr8rP)rQrSrPrPrRr8scCs|dS)a Sets the tick label formatting rule using d3 formatting mini- languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format And for dates see: https://github.com/d3/d3-time-format#locale_format We add one item to d3's date formatter: "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" The 'tickformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str r9rP)rQrPrPrRr9szYAxis.tickformatcCs ||d<dS)Nr9rP)rQrSrPrPrRr9scCs|dS)a, The 'tickformatstops' property is a tuple of instances of Tickformatstop that may be specified as: - A list or tuple of instances of plotly.graph_objs.layout.yaxis.Tickformatstop - A list or tuple of dicts of string/value properties that will be passed to the Tickformatstop constructor Supported dict properties: dtickrange range [*min*, *max*], where "min", "max" - dtick values which describe some zoom level, it is possible to omit "min" or "max" value by passing "null" enabled Determines whether or not this stop is used. If `false`, this stop is ignored even within its `dtickrange`. name When used in a template, named items are created in the output figure in addition to any items the figure already has in this array. You can modify these items in the output figure by making your own item with `templateitemname` matching this `name` alongside your modifications (including `visible: false` or `enabled: false` to hide it). Has no effect outside of a template. templateitemname Used to refer to a named item in this array in the template. Named items from the template will be created even without a matching item in the input figure, but you can modify one by making an item with `templateitemname` matching its `name`, alongside your modifications (including `visible: false` or `enabled: false` to hide it). If there is no template or no matching item, this item will be hidden unless you explicitly show it with `visible: true`. value string - dtickformat for described zoom level, the same as "tickformat" Returns ------- tuple[plotly.graph_objs.layout.yaxis.Tickformatstop] r;rP)rQrPrPrRr;s1zYAxis.tickformatstopscCs ||d<dS)Nr;rP)rQrSrPrPrRr;scCs|dS)a When used in a template (as layout.template.layout.yaxis.tickformatstopdefaults), sets the default property values to use for elements of layout.yaxis.tickformatstops The 'tickformatstopdefaults' property is an instance of Tickformatstop that may be specified as: - An instance of :class:`plotly.graph_objs.layout.yaxis.Tickformatstop` - A dict of string/value properties that will be passed to the Tickformatstop constructor Supported dict properties: Returns ------- plotly.graph_objs.layout.yaxis.Tickformatstop r:rP)rQrPrPrRr:szYAxis.tickformatstopdefaultscCs ||d<dS)Nr:rP)rQrSrPrPrRr:scCs|dS)a Determines where tick labels are drawn with respect to their corresponding ticks and grid lines. Only has an effect for axes of `type` "date" When set to "period", tick labels are drawn in the middle of the period between ticks. The 'ticklabelmode' property is an enumeration that may be specified as: - One of the following enumeration values: ['instant', 'period'] Returns ------- Any r<rP)rQrPrPrRr<szYAxis.ticklabelmodecCs ||d<dS)Nr<rP)rQrSrPrPrRr<scCs|dS)z Sets the tick length (in px). The 'ticklen' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float r=rP)rQrPrPrRr=s z YAxis.ticklencCs ||d<dS)Nr=rP)rQrSrPrPrRr='scCs|dS)a Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided). The 'tickmode' property is an enumeration that may be specified as: - One of the following enumeration values: ['auto', 'linear', 'array'] Returns ------- Any r>rP)rQrPrPrRr>-szYAxis.tickmodecCs ||d<dS)Nr>rP)rQrSrPrPrRr>BscCs|dS)z Sets a tick label prefix. The 'tickprefix' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str r?rP)rQrPrPrRr?Hs zYAxis.tickprefixcCs ||d<dS)Nr?rP)rQrSrPrPrRr?WscCs|dS)a Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines. The 'ticks' property is an enumeration that may be specified as: - One of the following enumeration values: ['outside', 'inside', ''] Returns ------- Any r@rP)rQrPrPrRr@]sz YAxis.tickscCs ||d<dS)Nr@rP)rQrSrPrPrRr@nscCs|dS)a Determines where ticks and grid lines are drawn with respect to their corresponding tick labels. Only has an effect for axes of `type` "category" or "multicategory". When set to "boundaries", ticks and grid lines are drawn half a category to the left/bottom of labels. The 'tickson' property is an enumeration that may be specified as: - One of the following enumeration values: ['labels', 'boundaries'] Returns ------- Any rArP)rQrPrPrRrAtsz YAxis.ticksoncCs ||d<dS)NrArP)rQrSrPrPrRrAscCs|dS)z Sets a tick label suffix. The 'ticksuffix' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str rBrP)rQrPrPrRrBs zYAxis.ticksuffixcCs ||d<dS)NrBrP)rQrSrPrPrRrBscCs|dS)a_ Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`. The 'ticktext' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray rCrP)rQrPrPrRrCszYAxis.ticktextcCs ||d<dS)NrCrP)rQrSrPrPrRrCscCs|dS)z Sets the source reference on Chart Studio Cloud for ticktext . The 'ticktextsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str rDrP)rQrPrPrRrDs zYAxis.ticktextsrccCs ||d<dS)NrDrP)rQrSrPrPrRrDscCs|dS)aM Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`. The 'tickvals' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray rErP)rQrPrPrRrEs zYAxis.tickvalscCs ||d<dS)NrErP)rQrSrPrPrRrEscCs|dS)z Sets the source reference on Chart Studio Cloud for tickvals . The 'tickvalssrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str rFrP)rQrPrPrRrFs zYAxis.tickvalssrccCs ||d<dS)NrFrP)rQrSrPrPrRrFscCs|dS)z Sets the tick width (in px). The 'tickwidth' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float rGrP)rQrPrPrRrGs zYAxis.tickwidthcCs ||d<dS)NrGrP)rQrSrPrPrRrGscCs|dS)ac The 'title' property is an instance of Title that may be specified as: - An instance of :class:`plotly.graph_objs.layout.yaxis.Title` - A dict of string/value properties that will be passed to the Title constructor Supported dict properties: font Sets this axis' title font. Note that the title's font used to be customized by the now deprecated `titlefont` attribute. standoff Sets the standoff distance (in px) between the axis labels and the title text The default value is a function of the axis tick labels, the title `font.size` and the axis `linewidth`. Note that the axis title position is always constrained within the margins, so the actual standoff distance is always less than the set or default value. By setting `standoff` and turning on `automargin`, plotly.js will push the margins to fit the axis title at given standoff distance. text Sets the title of this axis. Note that before the existence of `title.text`, the title's contents used to be defined as the `title` attribute itself. This behavior has been deprecated. Returns ------- plotly.graph_objs.layout.yaxis.Title rHrP)rQrPrPrRrH s&z YAxis.titlecCs ||d<dS)NrHrP)rQrSrPrPrRrH1scCs|dS)a Deprecated: Please use layout.yaxis.title.font instead. Sets this axis' title font. Note that the title's font used to be customized by the now deprecated `titlefont` attribute. The 'font' property is an instance of Font that may be specified as: - An instance of :class:`plotly.graph_objs.layout.yaxis.title.Font` - A dict of string/value properties that will be passed to the Font constructor Supported dict properties: color family HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman". size Returns ------- rIrP)rQrPrPrRrI7s(zYAxis.titlefontcCs ||d<dS)NrIrP)rQrSrPrPrRrIascCs|dS)a Sets the axis type. By default, plotly attempts to determined the axis type by looking into the data of the traces that referenced the axis in question. The 'type' property is an enumeration that may be specified as: - One of the following enumeration values: ['-', 'linear', 'log', 'date', 'category', 'multicategory'] Returns ------- Any rJrP)rQrPrPrRrJgsz YAxis.typecCs ||d<dS)NrJrP)rQrSrPrPrRrJyscCs|dS)a- Controls persistence of user-driven changes in axis `range`, `autorange`, and `title` if in `editable: true` configuration. Defaults to `layout.uirevision`. The 'uirevision' property accepts values of any type Returns ------- Any rKrP)rQrPrPrRrKs zYAxis.uirevisioncCs ||d<dS)NrKrP)rQrSrPrPrRrKscCs|dS)aH A single toggle to hide the axis while preserving interaction like dragging. Default is true when a cheater plot is present on the axis, otherwise false The 'visible' property must be specified as a bool (either True, or False) Returns ------- bool rLrP)rQrPrPrRrLsz YAxis.visiblecCs ||d<dS)NrLrP)rQrSrPrPrRrLscCs|dS)a7 Determines whether or not a line is drawn at along the 0 value of this axis. If True, the zero line is drawn on top of the grid lines. The 'zeroline' property must be specified as a bool (either True, or False) Returns ------- bool rMrP)rQrPrPrRrMszYAxis.zerolinecCs ||d<dS)NrMrP)rQrSrPrPrRrMscCs|dS)a" Sets the line color of the zero line. The 'zerolinecolor' property is a color and may be specified as: - A hex string (e.g. '#ff0000') - An rgb/rgba string (e.g. 'rgb(255,0,0)') - An hsl/hsla string (e.g. 'hsl(0,100%,50%)') - An hsv/hsva string (e.g. 'hsv(0,100%,100%)') - A named CSS color: aliceblue, antiquewhite, aqua, aquamarine, azure, beige, bisque, black, blanchedalmond, blue, blueviolet, brown, burlywood, cadetblue, chartreuse, chocolate, coral, cornflowerblue, cornsilk, crimson, cyan, darkblue, darkcyan, darkgoldenrod, darkgray, darkgrey, darkgreen, darkkhaki, darkmagenta, darkolivegreen, darkorange, darkorchid, darkred, darksalmon, darkseagreen, darkslateblue, darkslategray, darkslategrey, darkturquoise, darkviolet, deeppink, deepskyblue, dimgray, dimgrey, dodgerblue, firebrick, floralwhite, forestgreen, fuchsia, gainsboro, ghostwhite, gold, goldenrod, gray, grey, green, greenyellow, honeydew, hotpink, indianred, indigo, ivory, khaki, lavender, lavenderblush, lawngreen, lemonchiffon, lightblue, lightcoral, lightcyan, lightgoldenrodyellow, lightgray, lightgrey, lightgreen, lightpink, lightsalmon, lightseagreen, lightskyblue, lightslategray, lightslategrey, lightsteelblue, lightyellow, lime, limegreen, linen, magenta, maroon, mediumaquamarine, mediumblue, mediumorchid, mediumpurple, mediumseagreen, mediumslateblue, mediumspringgreen, mediumturquoise, mediumvioletred, midnightblue, mintcream, mistyrose, moccasin, navajowhite, navy, oldlace, olive, olivedrab, orange, orangered, orchid, palegoldenrod, palegreen, paleturquoise, palevioletred, papayawhip, peachpuff, peru, pink, plum, powderblue, purple, red, rosybrown, royalblue, rebeccapurple, saddlebrown, salmon, sandybrown, seagreen, seashell, sienna, silver, skyblue, slateblue, slategray, slategrey, snow, springgreen, steelblue, tan, teal, thistle, tomato, turquoise, violet, wheat, white, whitesmoke, yellow, yellowgreen Returns ------- str rNrP)rQrPrPrRrNs3zYAxis.zerolinecolorcCs ||d<dS)NrNrP)rQrSrPrPrRrNscCs|dS)z Sets the width (in px) of the zero line. The 'zerolinewidth' property is a number and may be specified as: - An int or float Returns ------- int|float rOrP)rQrPrPrRrOs zYAxis.zerolinewidthcCs ||d<dS)NrOrP)rQrSrPrPrRrO scCsdS)NaM anchor If set to an opposite-letter axis id (e.g. `x2`, `y`), this axis is bound to the corresponding opposite-letter axis. If set to "free", this axis' position is determined by `position`. automargin Determines whether long tick labels automatically grow the figure margins. autorange Determines whether or not the range of this axis is computed in relation to the input data. See `rangemode` for more info. If `range` is provided, then `autorange` is set to False. calendar Sets the calendar system to use for `range` and `tick0` if this is a date axis. This does not set the calendar for interpreting data on this axis, that's specified in the trace or via the global `layout.calendar` categoryarray Sets the order in which categories on this axis appear. Only has an effect if `categoryorder` is set to "array". Used with `categoryorder`. categoryarraysrc Sets the source reference on Chart Studio Cloud for categoryarray . categoryorder Specifies the ordering logic for the case of categorical variables. By default, plotly uses "trace", which specifies the order that is present in the data supplied. Set `categoryorder` to *category ascending* or *category descending* if order should be determined by the alphanumerical order of the category names. Set `categoryorder` to "array" to derive the ordering from the attribute `categoryarray`. If a category is not found in the `categoryarray` array, the sorting behavior for that attribute will be identical to the "trace" mode. The unspecified categories will follow the categories in `categoryarray`. Set `categoryorder` to *total ascending* or *total descending* if order should be determined by the numerical order of the values. Similarly, the order can be determined by the min, max, sum, mean or median of all the values. color Sets default for all colors associated with this axis all at once: line, font, tick, and grid colors. Grid color is lightened by blending this with the plot background Individual pieces can override this. constrain If this axis needs to be compressed (either due to its own `scaleanchor` and `scaleratio` or those of the other axis), determines how that happens: by increasing the "range" (default), or by decreasing the "domain". constraintoward If this axis needs to be compressed (either due to its own `scaleanchor` and `scaleratio` or those of the other axis), determines which direction we push the originally specified plot area. Options are "left", "center" (default), and "right" for x axes, and "top", "middle" (default), and "bottom" for y axes. dividercolor Sets the color of the dividers Only has an effect on "multicategory" axes. dividerwidth Sets the width (in px) of the dividers Only has an effect on "multicategory" axes. domain Sets the domain of this axis (in plot fraction). dtick Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48" exponentformat Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B. fixedrange Determines whether or not this axis is zoom-able. If true, then zoom is disabled. gridcolor Sets the color of the grid lines. gridwidth Sets the width (in px) of the grid lines. hoverformat Sets the hover text formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format And for dates see: https://github.com/d3/d3-time- format#locale_format We add one item to d3's date formatter: "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" layer Sets the layer on which this axis is displayed. If *above traces*, this axis is displayed above all the subplot's traces If *below traces*, this axis is displayed below all the subplot's traces, but above the grid lines. Useful when used together with scatter-like traces with `cliponaxis` set to False to show markers and/or text nodes above this axis. linecolor Sets the axis line color. linewidth Sets the width (in px) of the axis line. matches If set to another axis id (e.g. `x2`, `y`), the range of this axis will match the range of the corresponding axis in data-coordinates space. Moreover, matching axes share auto-range values, category lists and histogram auto-bins. Note that setting axes simultaneously in both a `scaleanchor` and a `matches` constraint is currently forbidden. Moreover, note that matching axes must have the same `type`. minexponent Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B". mirror Determines if the axis lines or/and ticks are mirrored to the opposite side of the plotting area. If True, the axis lines are mirrored. If "ticks", the axis lines and ticks are mirrored. If False, mirroring is disable. If "all", axis lines are mirrored on all shared-axes subplots. If "allticks", axis lines and ticks are mirrored on all shared-axes subplots. nticks Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto". overlaying If set a same-letter axis id, this axis is overlaid on top of the corresponding same-letter axis, with traces and axes visible for both axes. If False, this axis does not overlay any same-letter axes. In this case, for axes with overlapping domains only the highest- numbered axis will be visible. position Sets the position of this axis in the plotting space (in normalized coordinates). Only has an effect if `anchor` is set to "free". range Sets the range of this axis. If the axis `type` is "log", then you must take the log of your desired range (e.g. to set the range from 1 to 100, set the range from 0 to 2). If the axis `type` is "date", it should be date strings, like date data, though Date objects and unix milliseconds will be accepted and converted to strings. If the axis `type` is "category", it should be numbers, using the scale where each category is assigned a serial number from zero in the order it appears. rangebreaks A tuple of :class:`plotly.graph_objects.layout.yaxis.Rangebreak` instances or dicts with compatible properties rangebreakdefaults When used in a template (as layout.template.layout.yaxis.rangebreakdefaults), sets the default property values to use for elements of layout.yaxis.rangebreaks rangemode If "normal", the range is computed in relation to the extrema of the input data. If *tozero*`, the range extends to 0, regardless of the input data If "nonnegative", the range is non-negative, regardless of the input data. Applies only to linear axes. scaleanchor If set to another axis id (e.g. `x2`, `y`), the range of this axis changes together with the range of the corresponding axis such that the scale of pixels per unit is in a constant ratio. Both axes are still zoomable, but when you zoom one, the other will zoom the same amount, keeping a fixed midpoint. `constrain` and `constraintoward` determine how we enforce the constraint. You can chain these, ie `yaxis: {scaleanchor: *x*}, xaxis2: {scaleanchor: *y*}` but you can only link axes of the same `type`. The linked axis can have the opposite letter (to constrain the aspect ratio) or the same letter (to match scales across subplots). Loops (`yaxis: {scaleanchor: *x*}, xaxis: {scaleanchor: *y*}` or longer) are redundant and the last constraint encountered will be ignored to avoid possible inconsistent constraints via `scaleratio`. Note that setting axes simultaneously in both a `scaleanchor` and a `matches` constraint is currently forbidden. scaleratio If this axis is linked to another by `scaleanchor`, this determines the pixel to unit scale ratio. For example, if this value is 10, then every unit on this axis spans 10 times the number of pixels as a unit on the linked axis. Use this for example to create an elevation profile where the vertical scale is exaggerated a fixed amount with respect to the horizontal. separatethousands If "true", even 4-digit integers are separated showdividers Determines whether or not a dividers are drawn between the category levels of this axis. Only has an effect on "multicategory" axes. showexponent If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear. showgrid Determines whether or not grid lines are drawn. If True, the grid lines are drawn at every tick mark. showline Determines whether or not a line bounding this axis is drawn. showspikes Determines whether or not spikes (aka droplines) are drawn for this axis. Note: This only takes affect when hovermode = closest showticklabels Determines whether or not the tick labels are drawn. showtickprefix If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden. showticksuffix Same as `showtickprefix` but for tick suffixes. side Determines whether a x (y) axis is positioned at the "bottom" ("left") or "top" ("right") of the plotting area. spikecolor Sets the spike color. If undefined, will use the series color spikedash Sets the dash style of lines. Set to a dash type string ("solid", "dot", "dash", "longdash", "dashdot", or "longdashdot") or a dash length list in px (eg "5px,10px,2px,2px"). spikemode Determines the drawing mode for the spike line If "toaxis", the line is drawn from the data point to the axis the series is plotted on. If "across", the line is drawn across the entire plot area, and supercedes "toaxis". If "marker", then a marker dot is drawn on the axis the series is plotted on spikesnap Determines whether spikelines are stuck to the cursor or to the closest datapoints. spikethickness Sets the width (in px) of the zero line. tick0 Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`=*L* (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears. tickangle Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically. tickcolor Sets the tick color. tickfont Sets the tick font. tickformat Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format And for dates see: https://github.com/d3/d3-time- format#locale_format We add one item to d3's date formatter: "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" tickformatstops A tuple of :class:`plotly.graph_objects.layout.yaxis.Ti ckformatstop` instances or dicts with compatible properties tickformatstopdefaults When used in a template (as layout.template.layout.yaxis.tickformatstopdefaults), sets the default property values to use for elements of layout.yaxis.tickformatstops ticklabelmode Determines where tick labels are drawn with respect to their corresponding ticks and grid lines. Only has an effect for axes of `type` "date" When set to "period", tick labels are drawn in the middle of the period between ticks. ticklen Sets the tick length (in px). tickmode Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided). tickprefix Sets a tick label prefix. ticks Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines. tickson Determines where ticks and grid lines are drawn with respect to their corresponding tick labels. Only has an effect for axes of `type` "category" or "multicategory". When set to "boundaries", ticks and grid lines are drawn half a category to the left/bottom of labels. ticksuffix Sets a tick label suffix. ticktext Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`. ticktextsrc Sets the source reference on Chart Studio Cloud for ticktext . tickvals Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`. tickvalssrc Sets the source reference on Chart Studio Cloud for tickvals . tickwidth Sets the tick width (in px). title :class:`plotly.graph_objects.layout.yaxis.Title` instance or dict with compatible properties titlefont Deprecated: Please use layout.yaxis.title.font instead. Sets this axis' title font. Note that the title's font used to be customized by the now deprecated `titlefont` attribute. type Sets the axis type. By default, plotly attempts to determined the axis type by looking into the data of the traces that referenced the axis in question. uirevision Controls persistence of user-driven changes in axis `range`, `autorange`, and `title` if in `editable: true` configuration. Defaults to `layout.uirevision`. visible A single toggle to hide the axis while preserving interaction like dragging. Default is true when a cheater plot is present on the axis, otherwise false zeroline Determines whether or not a line is drawn at along the 0 value of this axis. If True, the zero line is drawn on top of the grid lines. zerolinecolor Sets the line color of the zero line. zerolinewidth Sets the width (in px) of the zero line. rP)rQrPrPrR_prop_descriptions s zYAxis._prop_descriptions)rHfontNcNP stt|dd|Nkr&|Nd|_dS|dkr4i}n4t||jrJ|}nt|tr`t |}nt d|N dd|_ |N dd|_ | d d}O|dk r|n|O}O|Odk r|O|d <| d d}O|dk r|n|O}O|Odk r|O|d <| d d}O|dk r|n|O}O|Odk r |O|d <| d d}O|dk r$|n|O}O|Odk r:|O|d <| d d}O|dk rT|n|O}O|Odk rj|O|d <| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O| dk r| n|O}O|Odk r|O|d<| dd}O| dk r| n|O}O|Odk r*|O|d<| dd}O| dk rD| n|O}O|Odk rZ|O|d<| dd}O| dk rt| n|O}O|Odk r|O|d<| dd}O| dk r| n|O}O|Odk r|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O|dk r4|n|O}O|Odk rJ|O|d<| dd}O|dk rd|n|O}O|Odk rz|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O|dk r|n|O}O|Odk r |O|d<| dd}O|dk r$|n|O}O|Odk r:|O|d<| dd}O|dk rT|n|O}O|Odk rj|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| dd}O|dk r|n|O}O|Odk r|O|d<| d d}O|dk r|n|O}O|Odk r|O|d <| d!d}O|dk r|n|O}O|Odk r*|O|d!<| d"d}O|dk rD|n|O}O|Odk rZ|O|d"<| d#d}O|dk rt|n|O}O|Odk r|O|d#<| d$d}O|dk r|n|O}O|Odk r|O|d$<| d%d}O|dk r|n|O}O|Odk r|O|d%<| d&d}O|dk r|n|O}O|Odk r|O|d&<| d'd}O| dk r4| n|O}O|Odk rJ|O|d'<| d(d}O|!dk rd|!n|O}O|Odk rz|O|d(<| d)d}O|"dk r|"n|O}O|Odk r|O|d)<| d*d}O|#dk r|#n|O}O|Odk r|O|d*<| d+d}O|$dk r|$n|O}O|Odk r |O|d+<| d,d}O|%dk r$|%n|O}O|Odk r:|O|d,<| d-d}O|&dk rT|&n|O}O|Odk rj|O|d-<| d.d}O|'dk r|'n|O}O|Odk r|O|d.<| d/d}O|(dk r|(n|O}O|Odk r|O|d/<| d0d}O|)dk r|)n|O}O|Odk r|O|d0<| d1d}O|*dk r|*n|O}O|Odk r*|O|d1<| d2d}O|+dk rD|+n|O}O|Odk rZ|O|d2<| d3d}O|,dk rt|,n|O}O|Odk r|O|d3<| d4d}O|-dk r|-n|O}O|Odk r|O|d4<| d5d}O|.dk r|.n|O}O|Odk r|O|d5<| d6d}O|/dk r|/n|O}O|Odk r|O|d6<| d7d}O|0dk r4|0n|O}O|Odk rJ|O|d7<| d8d}O|1dk rd|1n|O}O|Odk rz|O|d8<| d9d}O|2dk r|2n|O}O|Odk r|O|d9<| d:d}O|3dk r|3n|O}O|Odk r|O|d:<| d;d}O|4dk r|4n|O}O|Odk r |O|d;<| dd}O|7dk r|7n|O}O|Odk r|O|d><| d?d}O|8dk r|8n|O}O|Odk r|O|d?<| d@d}O|9dk r|9n|O}O|Odk r|O|d@<| dAd}O|:dk r|:n|O}O|Odk r*|O|dA<| dBd}O|;dk rD|;n|O}O|Odk rZ|O|dB<| dCd}O|dk r|>n|O}O|Odk r|O|dE<| dFd}O|?dk r|?n|O}O|Odk r|O|dF<| dGd}O|@dk r4|@n|O}O|Odk rJ|O|dG<| dHd}O|Adk rd|An|O}O|Odk rz|O|dH<| dId}O|Bdk r|Bn|O}O|Odk r|O|dI<| dJd}O|Cdk r|Cn|O}O|Odk r|O|dJ<| dKd}O|Ddk r|Dn|O}O|Odk r |O|dK<| dLd}O|Edk r$|En|O}O|Odk r:|O|dL<| dMd}O|Fdk rT|Fn|O}O|Odk rj|O|dM<| dNd}O|Gdk r|Gn|O}O|Odk r|O|dN<| dOd}O|Hdk r|Hn|O}O|Odk r|O|dO<| dPd}O|Idk r|In|O}O|Odk r|O|dP<| dQd}O|Jdk r|Jn|O}O|Odk r*|O|dQ<| dRd}O|Kdk rD|Kn|O}O|Odk rZ|O|dR<| dSd}O|Ldk rt|Ln|O}O|Odk r|O|dS<| dTd}O|Mdk r|Mn|O}O|Odk r|O|dT<|jft|f|Nd|_ dS)UaN Construct a new YAxis object Parameters ---------- arg dict of properties compatible with this constructor or an instance of :class:`plotly.graph_objs.layout.YAxis` anchor If set to an opposite-letter axis id (e.g. `x2`, `y`), this axis is bound to the corresponding opposite-letter axis. If set to "free", this axis' position is determined by `position`. automargin Determines whether long tick labels automatically grow the figure margins. autorange Determines whether or not the range of this axis is computed in relation to the input data. See `rangemode` for more info. If `range` is provided, then `autorange` is set to False. calendar Sets the calendar system to use for `range` and `tick0` if this is a date axis. This does not set the calendar for interpreting data on this axis, that's specified in the trace or via the global `layout.calendar` categoryarray Sets the order in which categories on this axis appear. Only has an effect if `categoryorder` is set to "array". Used with `categoryorder`. categoryarraysrc Sets the source reference on Chart Studio Cloud for categoryarray . categoryorder Specifies the ordering logic for the case of categorical variables. By default, plotly uses "trace", which specifies the order that is present in the data supplied. Set `categoryorder` to *category ascending* or *category descending* if order should be determined by the alphanumerical order of the category names. Set `categoryorder` to "array" to derive the ordering from the attribute `categoryarray`. If a category is not found in the `categoryarray` array, the sorting behavior for that attribute will be identical to the "trace" mode. The unspecified categories will follow the categories in `categoryarray`. Set `categoryorder` to *total ascending* or *total descending* if order should be determined by the numerical order of the values. Similarly, the order can be determined by the min, max, sum, mean or median of all the values. color Sets default for all colors associated with this axis all at once: line, font, tick, and grid colors. Grid color is lightened by blending this with the plot background Individual pieces can override this. constrain If this axis needs to be compressed (either due to its own `scaleanchor` and `scaleratio` or those of the other axis), determines how that happens: by increasing the "range" (default), or by decreasing the "domain". constraintoward If this axis needs to be compressed (either due to its own `scaleanchor` and `scaleratio` or those of the other axis), determines which direction we push the originally specified plot area. Options are "left", "center" (default), and "right" for x axes, and "top", "middle" (default), and "bottom" for y axes. dividercolor Sets the color of the dividers Only has an effect on "multicategory" axes. dividerwidth Sets the width (in px) of the dividers Only has an effect on "multicategory" axes. domain Sets the domain of this axis (in plot fraction). dtick Sets the step in-between ticks on this axis. Use with `tick0`. Must be a positive number, or special strings available to "log" and "date" axes. If the axis `type` is "log", then ticks are set every 10^(n*dtick) where n is the tick number. For example, to set a tick mark at 1, 10, 100, 1000, ... set dtick to 1. To set tick marks at 1, 100, 10000, ... set dtick to 2. To set tick marks at 1, 5, 25, 125, 625, 3125, ... set dtick to log_10(5), or 0.69897000433. "log" has several special values; "L", where `f` is a positive number, gives ticks linearly spaced in value (but not position). For example `tick0` = 0.1, `dtick` = "L0.5" will put ticks at 0.1, 0.6, 1.1, 1.6 etc. To show powers of 10 plus small digits between, use "D1" (all digits) or "D2" (only 2 and 5). `tick0` is ignored for "D1" and "D2". If the axis `type` is "date", then you must convert the time to milliseconds. For example, to set the interval between ticks to one day, set `dtick` to 86400000.0. "date" also has special values "M" gives ticks spaced by a number of months. `n` must be a positive integer. To set ticks on the 15th of every third month, set `tick0` to "2000-01-15" and `dtick` to "M3". To set ticks every 4 years, set `dtick` to "M48" exponentformat Determines a formatting rule for the tick exponents. For example, consider the number 1,000,000,000. If "none", it appears as 1,000,000,000. If "e", 1e+9. If "E", 1E+9. If "power", 1x10^9 (with 9 in a super script). If "SI", 1G. If "B", 1B. fixedrange Determines whether or not this axis is zoom-able. If true, then zoom is disabled. gridcolor Sets the color of the grid lines. gridwidth Sets the width (in px) of the grid lines. hoverformat Sets the hover text formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format And for dates see: https://github.com/d3/d3-time- format#locale_format We add one item to d3's date formatter: "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" layer Sets the layer on which this axis is displayed. If *above traces*, this axis is displayed above all the subplot's traces If *below traces*, this axis is displayed below all the subplot's traces, but above the grid lines. Useful when used together with scatter-like traces with `cliponaxis` set to False to show markers and/or text nodes above this axis. linecolor Sets the axis line color. linewidth Sets the width (in px) of the axis line. matches If set to another axis id (e.g. `x2`, `y`), the range of this axis will match the range of the corresponding axis in data-coordinates space. Moreover, matching axes share auto-range values, category lists and histogram auto-bins. Note that setting axes simultaneously in both a `scaleanchor` and a `matches` constraint is currently forbidden. Moreover, note that matching axes must have the same `type`. minexponent Hide SI prefix for 10^n if |n| is below this number. This only has an effect when `tickformat` is "SI" or "B". mirror Determines if the axis lines or/and ticks are mirrored to the opposite side of the plotting area. If True, the axis lines are mirrored. If "ticks", the axis lines and ticks are mirrored. If False, mirroring is disable. If "all", axis lines are mirrored on all shared-axes subplots. If "allticks", axis lines and ticks are mirrored on all shared-axes subplots. nticks Specifies the maximum number of ticks for the particular axis. The actual number of ticks will be chosen automatically to be less than or equal to `nticks`. Has an effect only if `tickmode` is set to "auto". overlaying If set a same-letter axis id, this axis is overlaid on top of the corresponding same-letter axis, with traces and axes visible for both axes. If False, this axis does not overlay any same-letter axes. In this case, for axes with overlapping domains only the highest- numbered axis will be visible. position Sets the position of this axis in the plotting space (in normalized coordinates). Only has an effect if `anchor` is set to "free". range Sets the range of this axis. If the axis `type` is "log", then you must take the log of your desired range (e.g. to set the range from 1 to 100, set the range from 0 to 2). If the axis `type` is "date", it should be date strings, like date data, though Date objects and unix milliseconds will be accepted and converted to strings. If the axis `type` is "category", it should be numbers, using the scale where each category is assigned a serial number from zero in the order it appears. rangebreaks A tuple of :class:`plotly.graph_objects.layout.yaxis.Rangebreak` instances or dicts with compatible properties rangebreakdefaults When used in a template (as layout.template.layout.yaxis.rangebreakdefaults), sets the default property values to use for elements of layout.yaxis.rangebreaks rangemode If "normal", the range is computed in relation to the extrema of the input data. If *tozero*`, the range extends to 0, regardless of the input data If "nonnegative", the range is non-negative, regardless of the input data. Applies only to linear axes. scaleanchor If set to another axis id (e.g. `x2`, `y`), the range of this axis changes together with the range of the corresponding axis such that the scale of pixels per unit is in a constant ratio. Both axes are still zoomable, but when you zoom one, the other will zoom the same amount, keeping a fixed midpoint. `constrain` and `constraintoward` determine how we enforce the constraint. You can chain these, ie `yaxis: {scaleanchor: *x*}, xaxis2: {scaleanchor: *y*}` but you can only link axes of the same `type`. The linked axis can have the opposite letter (to constrain the aspect ratio) or the same letter (to match scales across subplots). Loops (`yaxis: {scaleanchor: *x*}, xaxis: {scaleanchor: *y*}` or longer) are redundant and the last constraint encountered will be ignored to avoid possible inconsistent constraints via `scaleratio`. Note that setting axes simultaneously in both a `scaleanchor` and a `matches` constraint is currently forbidden. scaleratio If this axis is linked to another by `scaleanchor`, this determines the pixel to unit scale ratio. For example, if this value is 10, then every unit on this axis spans 10 times the number of pixels as a unit on the linked axis. Use this for example to create an elevation profile where the vertical scale is exaggerated a fixed amount with respect to the horizontal. separatethousands If "true", even 4-digit integers are separated showdividers Determines whether or not a dividers are drawn between the category levels of this axis. Only has an effect on "multicategory" axes. showexponent If "all", all exponents are shown besides their significands. If "first", only the exponent of the first tick is shown. If "last", only the exponent of the last tick is shown. If "none", no exponents appear. showgrid Determines whether or not grid lines are drawn. If True, the grid lines are drawn at every tick mark. showline Determines whether or not a line bounding this axis is drawn. showspikes Determines whether or not spikes (aka droplines) are drawn for this axis. Note: This only takes affect when hovermode = closest showticklabels Determines whether or not the tick labels are drawn. showtickprefix If "all", all tick labels are displayed with a prefix. If "first", only the first tick is displayed with a prefix. If "last", only the last tick is displayed with a suffix. If "none", tick prefixes are hidden. showticksuffix Same as `showtickprefix` but for tick suffixes. side Determines whether a x (y) axis is positioned at the "bottom" ("left") or "top" ("right") of the plotting area. spikecolor Sets the spike color. If undefined, will use the series color spikedash Sets the dash style of lines. Set to a dash type string ("solid", "dot", "dash", "longdash", "dashdot", or "longdashdot") or a dash length list in px (eg "5px,10px,2px,2px"). spikemode Determines the drawing mode for the spike line If "toaxis", the line is drawn from the data point to the axis the series is plotted on. If "across", the line is drawn across the entire plot area, and supercedes "toaxis". If "marker", then a marker dot is drawn on the axis the series is plotted on spikesnap Determines whether spikelines are stuck to the cursor or to the closest datapoints. spikethickness Sets the width (in px) of the zero line. tick0 Sets the placement of the first tick on this axis. Use with `dtick`. If the axis `type` is "log", then you must take the log of your starting tick (e.g. to set the starting tick to 100, set the `tick0` to 2) except when `dtick`=*L* (see `dtick` for more info). If the axis `type` is "date", it should be a date string, like date data. If the axis `type` is "category", it should be a number, using the scale where each category is assigned a serial number from zero in the order it appears. tickangle Sets the angle of the tick labels with respect to the horizontal. For example, a `tickangle` of -90 draws the tick labels vertically. tickcolor Sets the tick color. tickfont Sets the tick font. tickformat Sets the tick label formatting rule using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-3.x-api- reference/blob/master/Formatting.md#d3_format And for dates see: https://github.com/d3/d3-time- format#locale_format We add one item to d3's date formatter: "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display "09~15~23.46" tickformatstops A tuple of :class:`plotly.graph_objects.layout.yaxis.Ti ckformatstop` instances or dicts with compatible properties tickformatstopdefaults When used in a template (as layout.template.layout.yaxis.tickformatstopdefaults), sets the default property values to use for elements of layout.yaxis.tickformatstops ticklabelmode Determines where tick labels are drawn with respect to their corresponding ticks and grid lines. Only has an effect for axes of `type` "date" When set to "period", tick labels are drawn in the middle of the period between ticks. ticklen Sets the tick length (in px). tickmode Sets the tick mode for this axis. If "auto", the number of ticks is set via `nticks`. If "linear", the placement of the ticks is determined by a starting position `tick0` and a tick step `dtick` ("linear" is the default value if `tick0` and `dtick` are provided). If "array", the placement of the ticks is set via `tickvals` and the tick text is `ticktext`. ("array" is the default value if `tickvals` is provided). tickprefix Sets a tick label prefix. ticks Determines whether ticks are drawn or not. If "", this axis' ticks are not drawn. If "outside" ("inside"), this axis' are drawn outside (inside) the axis lines. tickson Determines where ticks and grid lines are drawn with respect to their corresponding tick labels. Only has an effect for axes of `type` "category" or "multicategory". When set to "boundaries", ticks and grid lines are drawn half a category to the left/bottom of labels. ticksuffix Sets a tick label suffix. ticktext Sets the text displayed at the ticks position via `tickvals`. Only has an effect if `tickmode` is set to "array". Used with `tickvals`. ticktextsrc Sets the source reference on Chart Studio Cloud for ticktext . tickvals Sets the values at which ticks on this axis appear. Only has an effect if `tickmode` is set to "array". Used with `ticktext`. tickvalssrc Sets the source reference on Chart Studio Cloud for tickvals . tickwidth Sets the tick width (in px). title :class:`plotly.graph_objects.layout.yaxis.Title` instance or dict with compatible properties titlefont Deprecated: Please use layout.yaxis.title.font instead. Sets this axis' title font. Note that the title's font used to be customized by the now deprecated `titlefont` attribute. type Sets the axis type. By default, plotly attempts to determined the axis type by looking into the data of the traces that referenced the axis in question. uirevision Controls persistence of user-driven changes in axis `range`, `autorange`, and `title` if in `editable: true` configuration. Defaults to `layout.uirevision`. visible A single toggle to hide the axis while preserving interaction like dragging. Default is true when a cheater plot is present on the axis, otherwise false zeroline Determines whether or not a line is drawn at along the 0 value of this axis. If True, the zero line is drawn on top of the grid lines. zerolinecolor Sets the line color of the zero line. zerolinewidth Sets the width (in px) of the zero line. Returns ------- YAxis Zyaxis_parentNzThe first argument to the plotly.graph_objs.layout.YAxis constructor must be a dict or an instance of :class:`plotly.graph_objs.layout.YAxis`Z skip_invalidF _validateTrrrrrr r r r r rrrrrrrrrrrrrrrrrrr r"r!r#r$r%r&r'r(r)r*r+r,r-r.r/r0r1r2r3r4r5r6r7r8r9r;r:r<r=r>r?r@rArBrCrDrErFrGrHrIrJrKrLrMrNrO)superr__init__rV isinstance __class__Zto_plotly_jsondict_copycopy ValueErrorpopZ _skip_invalidrWZ_process_kwargs)PrQargrrrrrr r r r r rrrrrrrrrrrrrrrrrrr r"r!r#r$r%r&r'r(r)r*r+r,r-r.r/r0r1r2r3r4r5r6r7r8r9r;r:r<r=r>r?r@rArBrCrDrErFrGrHrIrJrKrLrMrNrOkwargsZ_v)r[rPrRrY sf                                                                                                                                                           zYAxis.__init__)MNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNNN)X__name__ __module__ __qualname__Z_parent_path_strZ _path_strZ _valid_propspropertyrsetterrrrrr r r r r rrrrrrrrrrrrrrrrrrr r"r!r#r$r%r&r'r(r)r*r+r,r-r.r/r0r1r2r3r4r5r6r7r8r9r;r:r<r=r>r?r@rArBrCrDrErFrGrHrIrJrKrLrMrNrOrTZ_mapped_propertiesrY __classcell__rPrP)r[rRrsp       " 8   6      5    5         E               5       5 (  3    (*5 r)Zplotly.basedatatypesrZ_BaseLayoutHierarchyTyper^r]rrPrPrPrRs